How I got an Apple Airport Wireless Router to work with an AT&T Universe Modem and Visa Versa December 2022 Turn on an AT&T modem that is connected to a fiber optic cable. Turn on an Apple Airport/Time Capsule.ĭisconnect the LAN cable connecting the Apple Airport/Time Capsule to the old modem. Connect the LAN cable from the Apple Airport/Time Capsule to the AT&T modem. Make sure there is a green light on next to the LAN plug after connecting the LAN cable wire. I added that step to all of the steps listed below and everything continues to work fine even when I simulate losing power and recycling both devices. When I saw the Base Station I selected to see what the problem was by selecting the error indicator and it expanded to explain that I needed to change the Apple Airport Wireless Router to use Bridge Mode only. The next time I recycled the AT&T modem and Apple Airport Wireless Router the router amber light came back on and the Airport Utility opened. Once I got the Apple Airport/Time Capsule working as before with it's wireless network name, all of my other devices started connecting and working as before. Continue. Allocation Mode: Passthrough Default Server Internal Address Passthrough Mode DHCPS-dynamic Save Finder Applications Utilities Airport Utility Base Station Name Airport Time Capsule Edit Internet Connect Using: DHCP Internet Options Configure IpV6: Link-local only Save Update The amber light turned to a green light on the Apple Airport/Time Capsule and I could now connect to it instead of the AT&T modem so that I could continue to use the Time Capsule for computer backups and the printer connected to the Apple Airport/Time Capsule wirelessly. Enter the device access code printed on a label on the back of the modem. Open an Apple computer. Connect to AT&T wireless modem using network id and password that came with the modem or the custom name and password if those were changed. Make sure there is a green light on next to the LAN plug after connecting the LAN cable wire. Connect the LAN cable from the Apple Airport/Time Capsule to the AT&T modem. Disconnect the LAN cable connecting the Apple Airport/Time Capsule to the old modem. To insist you need gig in this case just shows what a moron you are.How I got an Apple Airport Wireless Router to work with an AT&T Universe Modem and Visa Versa December 2022 Turn on an AT&T modem that is connected to a fiber optic cable. Turn on an Apple Airport/Time Capsule. That would be a huge stinking waste of hardware putting a gig port on it. Nowhere near the wirespeed of 100 base T. Sigh.ĭo you honestly think 802.11n can outrun 100 BaseTX Full-duplex? At MAX, 802.11n runs at bursts of 70 mbit. As sexy as this looks (and I'm definitely snatching an ?TV when it comes out), and dare I say the relatively competitive pricing for an 802.11n unit, I will probably seek out a 3rd party alternative when I go on the market 2~3 months from now. I guess we in the US can find some consolation in the fact that 99% of us don't have to worry about an internet connection that will saturate the 100Base-TX WAN port, but users in developed countries (Japan, Korea, etc.) who have FTTH exceeding 100Mbit/sec will find this less appealing still. That's lame, especially when competing products from Linksys and I'm sure soon from Belkin et al. Instead of being able to tap into the full potential of 802.11n, the maximum throughput is going to be 100Mbit/sec. So let's say I want to use the previous version iMac that doesn't have 802.11n but does have Gigabit Ethernet as a base server for ?TV via AirPort. Makes no sense when (1) all shipping Macs now sport Gigabit Ethernet, and (2) the wireless protocol (802.11n) is FASTER than the wired ports. Why, oh why, are the LAN/WAN (at the very least, the LAN) ports not Gigabit?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |